NEW!! PCC TECHWELL magwell for Original PSA Lowers (for Glock Mag:)
Two Design Patents Pending, Utility Patent Granted
Lightning-Fast Mag Changes. Simple Slide-On, Two Screw Installation. Requires no gunsmithing, or alterations to the receiver. 5/64” Hex Wrench included.
Made from super slippery, super durable, Acetyl Delrin. Easy to file off the slight wear over time even for the daily dry-firer.
For Glock Mags
SPECS: Acetyl Delrin. Weight 2.95 Oz. Stock Colors: Black only (for now)
Installation
This one is a little special because the screw, while positioned in the best place, is bit of a pain to get to, so we figured out a quick trick: Carefully align the screw into its hole with the screw in hex in place, then give it a light tap or two with whatever is handy (in the photo we just used another hex wrench from the set), then carefully and gently with very little pressure get the first few turns into place, et voila, the rest is easy. One more thing, this screw’s only job is to keep the Techwell securely in place fore/aft, so no downward pressure is necessary, just screw down until the head touches the bottom and you’re there!
You can be the first one to write a review.
){kind=link}