• Shooting Sports Innovations Nitro Fin Tanfoglio/CZ, Slide Lock Thumb Rest

click on thumbnail to zoom

Shooting Sports Innovations Nitro Fin Tanfoglio/CZ, Slide Lock Thumb Rest

Other products by Shooting Sports Innovations

Item #: NF17-4-TF
Reg. Price: $120.00
Our Price: $120.00
color  
The product is currently out of stock.

Description 

NITRO FIN THUMB REST

Machined out of one solid piece of 17-4 stainless.  Based on the very popular Nitro Fin for the 2011 guns.  In most applications if your pin size matches....all you have to do

is slide your old slide stop out, slide this one in, and you have a thumbrest on your Limited or Open USPSA gun. This product has been tested in EAA Witness Tanfoglio LIMITED, STOCK I II III and Witness Match firearms.  Read below!!!

PLEASE READ: Check your current slide lock for pin size.  Use caution test fitting it before test firing at the range.  The Nitro Fin by design fits close inside the slide lock relief of the frame, some gun smith work may be required.

The Pin size is 0.197

 The Pin design is very similiar to CZ firearms.. Be aware that if you do purchase this for a CZ firearm.. Fitting WILL be required.

Slide lock does not lock the slide back on last round or manually.

 

Shooting Sports Innovations stands behind all of its products.  If you have an issue, let us know.  However, firearms are inherently dangerous and must be treated with respect at all times.  Please make sure you are fully familiar with your firearm, how to use it safely, and that you follow the four rules of firearm safety at all times.  Shooting Sports Innovations cannot and will not be held responsible for any negligent use of any firearm or Shooting Sports Innovations products.

Reviews

Average Rating:
(based on 5 reviews)

Showing 5 Reviews:

RatingReviewerReview
by WC
on 7/15/2020
Thumb rest slide stop
Really easy to deal with. Buy with confidence.
by Renato Mendonca
on 2/25/2020
Possible but not quite for CZ
Ordered the thumb rest for my shadow 2. the part is good quality, a bit wide but manageable. The description stated that would require fitting but It could have come with instructions as to where and how much material would need to come out.
The pin for the slide stop is too short for the S2 so the mag won’t actuate it when it’s empty - that’s why regardless of fitting, the slide won’t open on the last round. The takedown pin is too tick so you will need it to be reduced to appropriate dimension or your slide will hit it hard and may damage either part.
That same pin is too tall for the shadow slide so you will need to reduce material from the top as well from the side (to have room to move)

So as long as you are ok with spending this much on a piece and more on gunsmith for fitting and cerakote you should be ok. Otherwise buy the one that comes with the TSO and have your frame drilled for it.

I’d say please have one specific for the CZs...
by signdoc
on 1/26/2020
Nice idea but
I wish in the description it would have said may require gunsmith fitting.  it didn't.  Now in order to use the slide lock gas pedal, the gun must go to a gunsmith for fitting.  Unfortunately this takes it out of service for an undetermined amount of time..  I purchased the most expense one thinking it was a drop in part.  shame on me 

Response from Chuck- The description has this in it , in bold print.
"PLEASE READ: Check your current slide lock for pin size. Use caution test fitting it before test firing at the range. The Nitro Fin by design fits close inside the slide lock relief of the frame, some gun smith work may be required."
So the review is not fair to the product. But I am allowing it since it will help others. We have sold hundreds of these that are used successfully.
by Roger
on 12/17/2019
Quality Product
Bought this for my CZ TS. Took some fitting for it to work but that is no fault of the product. 
by Vincent Mapa
on 11/8/2018
Nitro fin
Excellent! Adds stability to your grip
Review and Rate this Item