STI Trigger - 2011

  • Item #:  STI 2011 Trigger
Reg. Price: $39.99
Our Price: $39.99
The product is currently out of stock.
The STI Trigger Bow is wire EDM cut stainless steel, with a notch for trigger take up adjustment. The trigger bow is a glass filled nylon polymer to prevent inertial firing, with a set screw for over-travel adjustment
(8)
Average rating 10 out of 10 ( based on 8 reviews )

Short Trigger for short fingers

Review by Keithwhite100 on 5/4/2021

Worked great, fit without issue.

STI 2011 short trigger

Review by craig c on 5/27/2020

I installed this trigger to shorten the reach I had to my trigger. This worked well for me but you might like a longer one. This was easy to install and has worked perfectly

Good

Review by rene forbes on 4/17/2019

Works well

Trigger

Review by heitmann45 on 5/3/2018

Just as good as any other STI trigger. No problems at all.

STI gunsmith trigger

Review by Keith on 2/6/2018

Great trigger. Just keep taking a little off on a flat surface with some 220 grit sandpaper until you reach the desired length. (Use some 100 grit First if you have more to remove) Go slow and keep checking to make sure you are keeping it square. Polish up with some 1000 grit and put a very slight bevel to the sharp corners.

Write a Review