Taylor Freelance Canik Basepad +4 - Mete/Rival Edition - Black

"Tall Shoulder" Parts: Most Mete and Rival frames made in 2021-2023 came with extra-wide magazine wells. The below-listed parts have extra-tall shoulders to match. Canik changed the magwell shape in 2023/2024 (fixing this problem), so these tall-shoulder basepads often won't fit the newest guns.

How do I know what I need? The first few digits of the serial number include the year of manufacture, i.e. 23xx. . . indicates a 2023-built gun. If you have 24-built gun (include all the TTI frames) DO NOT use these basepads -- you need the standard size.

The O-Ring Workaround: If you find you have a "fat" magwell and don't want to use the tall-shoulder style, you can make any of our other Canik basepads work normally by putting a 1 inch by 1/8 inch O-ring on the mag tube. The O-ring acts as a bumper, keeping the magazine from overpenetrating.

Built to the specifications of 6-time US National Champion Nils Jonasson, this basepad updates our plus-4s to match the Rival/Mete!

What's new?

• Overpenetration issue SOLVED (Higher shoulders prevent the basepad from wedging "too far in" and stopping the slide. On the The Mete and Rival, normal basepads over-penetrate. Sometimes the mag can get wedged "too far in'' and stop the slide.)
• Flattened back stands the mag up for super-quick off-the-table reloads.
• Max 140mm length = +4+ capacity (optimized to max out the USPSA gauge)
• New traction cuts on the sides match the slide cuts on the Rival
• Works with TF *AND* Canik magwells.

IMPORTANT: We built these to race, so they REQUIRE the wide-open magazine well found on the Mete, Rival, and Rival-S! They will not work on earlier Canik models!

Weight: 1.0 ounces
Material: Aluminum
Color: Black

**Mete/Rival Specific (tall shoulders)

"Tall Shoulder" Parts: Most Mete and Rival frames made in 2021-2023 came with extra-wide magazine wells. The below-listed parts have extra-tall shoulders to match. Canik changed the magwell shape in 2023/2024 (fixing this problem), so these tall-shoulder basepads often won't fit the newest guns.

How do I know what I need? The first few digits of the serial number include the year of manufacture, i.e. 23xx. . . indicates a 2023-built gun. If you have 24-built gun (include all the TTI frames) DO NOT use these basepads -- you need the standard size.

The O-Ring Workaround: If you find you have a "fat" magwell and don't want to use the tall-shoulder style, you can make any of our other Canik basepads work normally by putting a 1 inch by 1/8 inch O-ring on the mag tube. The O-ring acts as a bumper, keeping the magazine from overpenetrating.