A medium strength, oil tolerant anaerobic threadlocker designed for locking threaded fasteners from 1/4” to 3/4” in diameter, that require disassemble with standard hand tools. Exhibits good temperature and solvent resistance.
Medium Strength, Oil Tolerant, Removable
| Weight | 0.01 lbs |
|---|---|
| Color | |
| Viscosity Range (cP) | 2250 to 12000 |
| Temp Range Low (°F) | -65 |
| Temp Range High (°F) | 300 |
| Specific Gravity | 1.10 |
| Break Away Torque (in lbs) | 195 |
| Prevailing Off Torque (in lbs) | 70 |
| Plastic Compatibility | |
| Open Time | B |
| Key Substrates | |
| Gap Fill (in) | 0.02 |
| Function | |
| Full Cure Time (hours) | 24 hrs |
| Fixture Time (mins) | 30 |
| Cure Type | |
| Competes with Loctite® | Competes with Loctite® 243™(243 is a trademark and Loctite is a registered trademark of Henkel IP & Holding GMBH LLC, Germany) |
| Compatible Primers | |
| Product Warnings | Not recommended for oxygen rich environments, Not recommended for use with plastics |
| Shelf Life (months) | 24 |
| Country of Origin | |
| Certification Indicator | |
| Origin Criterion | |
| Qualification Method |
You can be the first one to write a review.
_t.png)
