• Hamlet Dynamics Fullback RTS2 Open Mount

click on thumbnail to zoom

Hamlet Dynamics Fullback RTS2 Open Mount

Other products by Hamlet Dynamics

Item #: HD-1001
Our Price: $140.00
The product is currently out of stock.
Notify me when this is available 

Description 

Features:

Locates RTS2 tight to the rear of slide

Maximum ejection angle clearance

Designed for enhanced stiffness

Clean look with no overhanging edges or sharp corners

 

Material: 7075 Aluminum

Finish: Black Anodize

Weight: 36 grams

Drill Pattern: 5 holes on 0.375" spacing accepting 5-40 or 6-40 hardware

Offset: 0.110"

 

Includes:

Mount

8-32 socket head screws for mounting RTS2 to mount

5-40 hardware for attaching mount to frame (including 2 screws for thumbrest)



Not Included:

6-40 hardware which is available separately by e-mailing hamletdynami[email protected]

 

Notes:

Mount is designed around the standard 0.830" wide dust cover with a flat topped slide. If used with wider frames the mounting pad will need to be machined narrower and if used with a narrower frame a spacer may be required. The final fore and aft location of the RTS2 will depend on the location of the hole pattern in the frame. As always, installation by a competent gunsmith is required. Fitting may be required to ensure ample clearance between the mount and slide.

 

Will not work with typical left side slide rackers.

 

The mount is designed to provide all the benefits of a rear mounted dot while maintaining as much clearance as possible for ejected brass. A gun with a well tuned and consistent ejection pattern is still required to take advantage of this clearance for malfunction free operation.

 

A 1 degree downward angle is built into the mount requiring frame holes to be drilled at no angle.

Reviews

Be the first to submit a review on this product!
Review and Rate this Item