DAA Dry-Fire Practice Magazine

Other products by Double Alpha- Saul Kirsch
  • Item #:  1032
Reg. Price: $20.95
Our Price: $20.95
- +

The DAA Dry-Fire Practice Magazine is designed to emulate as closely as possible the feel and performance of a fully loaded real magazine. It allows you to dry-fire without introducing dummy loaded rounds to weigh down real magazines, which can be risky, and saves wear on your real mags.

Using internal steel weights, it comes close to the actual weight of a fully loaded mag, and the Patent-Pending spring-loaded follower on the top of the mag pushing up against the slide as you insert it into the gun, making the reload feel just like the real thing!

The tension on the follower makes not only the insertion feel realistic, but also ensures that the magazine does not rattle around in the gun while you train, when you hit the mag-release, it ejects under some tension, just like the real thing. The mag and follower are design NOT to activate the slide stop so you can practice racking the slide as you load, without having it lock back.

No ammo of any kind can be loaded into these magazines, helping to keep your dry-fire safe and ammo-free. The purple color and red follower make it clear to all that these are not real magazines and that no live ammo is in play.

The DAA Dry-Fire Practice Mag is constructed of durable fiber-reinforced nylon, and can take a beating. But we still recommend to avoid dropping the mags onto a concrete floor, as they are heavy and some damage may occur. Some customers have had breakage of the upper lips when dropping on concrete! Dropping onto tiled floors may damage both the floor and the magazine!
We recommend dropping onto a carpeted floor or something that can absorb the impact.

We have tried to design the base pads of the magazines to fit with most magwells, however, it is possible that some magwells may prevent the magazine from seating all the way. Fortunately, these magazines can easily be filed on with a file or dremmel tool to fit your particular magwell type.

Please note:
We do not recommend using these dry-fire mags in combination with the CoolFireTrainer!
The high speed motion of the slide created by the CFT, combines with the spring loaded follower pushing up, causes the magazine to bounce violently as the gun cycles.
This leads to excessive wear around the mag catch area and can render them unusable.

Will these mags fits my gun?

It is impossible for us to say for sure if the magazine will fit your particular gun model. There are over 150 brands of 1911’s and probably 30 or more high cap 2011 frames on the market. There are many generations of Glocks too, and a bunch of CZ’s. It’s impossible for us to test them all. 

What we can say is this:

The 1911 model mag was modelled from a Megar 1911 8 round .45 mag. If such a mag fits your gun, so should the DAA Dry-fire Mag.

The 2011 model mag was modelled from an STI 140mm 38S mag. If such a mag fits your gun, so should the DAA Dry-fire Mag.

The Glock magazine was modelled from a 9mm G17 Gen4 mag. If such a mag fits your gun, so should the DAA Dry-fire Mag.

The CZ magazine was modelled from a SP01 9mm mag, and testing in the Shadow2 as well. If such a mag fits your gun, so should the DAA Dry-fire Mag.

The SIG320 mag was modelled from a P320 9mm mag, and tested on the P320X5 as well. If such a mag fits your gun, so should the DAA Dry-fire Mag.

*** it is possible that you may need to remove a little plastic from the base pad of the magazine to fit your magwell.


US Patent Pending.

Average rating 7 out of 10 ( based on 4 reviews )

Needs design improvements

Review by Brzarkry on 1/9/2023

The spring loaded follower is retained on the front of the mag by a plastic lip which is easily broken with repeated impacts onto a carpeted floor. Also, the mag release notch does not wear well with repeated insertions and releases. This product is only good for insertion and release at the beginning and end of a dry fire session. It is not suitable at all for any part of practicing reloads. I fixed the follower retention by drilling two small holes on each side of the mag and inserting a pin across the opening to bear on the ledge on the front of the follower. Better to load yourself some dummy rounds and use your actual mags.


Review by (Hoppy ) Richard on 10/19/2021

Outside of custom molded earplugs these are my best investments for dry fireing, I spend hours on my pistols and reloads and the mag wells take a battering, with these training aids that no longer happens and it's actual weight ,I can say nothing negative,they are great 👍🙏

DAA Dry-Fire Mags

Review by Erik on 2/27/2021

These weigh and feel very similar to actual mags, are much simpler and 100% safer. More than all that, they allow you to rack the slide and reset the trigger without removing the magazine. Wish I'd bought these years ago and saved my mags and magwell a lot of wear and tear.

Not as heavy but clicks in well into 2011

Review by mini.beast on 2/24/2021

Not as heavy as a loaded 140mm MAG with dummy rounds (minus the primer and powder) for my 2011. They are about half the weight. What I do like is that the red piece allows to rack the slide for unloaded starts! Wish I had a 170mm mag version. A little heavier would work make it more realistic.

Write a Review