• Double Alpha Magnet for Racer Mag Pouch

click on thumbnail to zoom

Double Alpha Magnet for Racer Mag Pouch

Other products by Double Alpha-Saul Kirsch

Item #: 101340
Our Price: $17.95
Vinyl Cap
Quantity:
 
8 units available

Description  more details

The DAA Racer Pouch Magnet Kit includes the parts you will need to attach the DAA magnet to your DAA Racer pouch. This includes:
1. DAA large magnet
2. Stainless steel M5 10mm screw
3. Brass thermal insert M5 nut, 6mm long

You will require:
1. A drill and bit of 6.3-6.5mm
2. A soldering iron to heat the nut and push it through
3. A file and some sandpaper to clean the plastic on the inside of the pouch

Assembly:
1. Dismantle your pouch body, and remove the side insert for easier access.
2. Decide on where you want to position the magnet, and drill a 6.3-6.5 mm hole through the pouch wall.
3. Push the insert into the hole, from the inside of the pouch, you will be able to get just the tip of the insert into the hole.
4. Using the tip of a hot soldering iron, push on the insert gently until it heats up enough and starts to sink into the plastic. Use a light-hand and be patient! Do not push it through too hard or too fast, you do not want it going all the way through the side wall of the pouch. Push the nut through until it’s tail is flush with the inside of the pouch. It will protrude out on the outside about 3mm.
5. Using a file and/or some sand paper, clean off any plastic residue you may have around the edge of the insert on the inside, so that it does not interfere with the magazine in the pouch.
6. Attach your magnet to the pouch using the supplied screw. You can use a drop of locktite to prevent the screw from coming loose.


Reviews

Average Rating:
(based on 2 reviews)

Showing 2 Reviews:

RatingReviewerReview
by Vinnie Bradway
on 7/11/2018
Mag pouch
Works great
by DonA
on 5/18/2018
from Kentucky
Easy add magnet
I followed the directions and It works great. If you have to pickup from a table and go it is the fast way to go. 
Review and Rate this Item