Arredondo for XL650

Review by Empty pocket on 6/1/2021

Company is good and I have zero issues with them. The product is hot garbage. It does not fit a 650 for crap and just pops up and out of place as you are running the press. I personally would not recommend it to anyone as it is a waste of money and just sits on the bench now.

Speedy

Review by Flywheel on 8/6/2020

Super fast delivery. Great products as well.

Shell Stabilizer

Review by Hogrider on 6/18/2020

This item does a good job of stabilizing the cases; word of advise: make sure that your seating die does not initially install against the shell plate. If so, the die bottom with destroy the stabilizer. Don't ask me how I know this!

Had Higher Hopes

Review by BrianW on 3/20/2020

It's a piece of plastic with a rubber bumper. I guess I thought it was a piece of metal with a rubber bumper. I had to trim the rubber piece because it tilted the casings inwards and caused my MBF to stop dropping consistently. It does seem to help a little with powder spillage. I probably wouldn't buy it again though.

worth it.

Review by Brandon on 6/26/2019

loading 9.6 grains in 9mm, my press is just as clean and free of spilt powder after 500rds as when I started. occasionally one side lifts up an 1/8th of an in and I have to press it back down.