Hamlet Dynamics Fullback RTS2 Open Mount Stainless Steel

Other products by Hamlet Dynamics

Item #: HD-1002
Our Price: $200.00
1 units available


Slight set-back of RTS2

Clear ejection path

Designed for maximum stiffness with single-sided mounting

Centered, no offset


Material: Stainless Steel

Finish: Raw

Weight: 3.3 oz

Drill Pattern: 5 holes on 0.375" spacing accepting 5-40 or 6-40 hardware




8-32 socket head screws for attaching RTS2 to mount

5-40 hardware for attaching mount to frame (including 2 screws for thumbrest)



Mount is designed around the standard 0.830" wide dust cover with a flat topped slide. If used with wider frames the mounting pad will need to be machined thinner. The final fore and aft location of the RTS2 will depend on the location of the hole pattern in the frame. As always, installation by a competent gunsmith is required. Fitting may be required to ensure ample clearance between the mount and slide.


May require slight material removal for left side mounted slide rackers.


This mount is designed with slight optic set-back while allowing a clear path for ejected brass. A short ejector is recommended to take advantage of the design but is not a requirement when ejection is consistent.


A 1 degree downward angle is built into the mount.


Be the first to submit a review on this product!
Review and Rate this Item